Snow Performance Stg 2.5 Progressive Methanol Injection Kit (SS Braided Line 4AN Fittings)

PD Notes: A Methanol injection kit will lower your charge air temperatures and increase your octane rating (when used with 100% methanol). In many cases this can produce power levels matching what’s achievable by using e85. It can also be used as supplemental fueling when going for power levels that the factory fuel system can’t support (450+). Our preferred nozzle location is in the charge pipe for most applications. For this we recommend using the CV Fab cold side charge pipe as it has a methanol bung built in that will work with most methanol injection systems. A boost source is required to be run to the controller. We highly recommend investing in a Turbosmart boost reference adapter to make your installation easier.

Unlock 30-50+WHP on stock turbo Ecoboost while decreasing your air temps by up to 30+ degrees! You can see even more power depending on your turbo size/engine upgrades. The Stage 2 uses the progressive VC-50 controller (52mm Gauge) that proportionally injects more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability., , The Stage 2 introduces the VC-50 Controller (ISO 9001 Manufactured). The VC-50 offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, low level, secondary nozzle activation, prime button, and 2 fault codes directly on the screen you can tailor the controller to your OEM gauges or mix and match up to two colors. Comes with 4AN fittings and stainless steel braided line to mount pump/tank in engine bay of vehicle.